Wheel Bolt M12x1.5 20mm Tapered: Beetle (50-79), Karmann Ghia (60-67), Type 3 (6

 
This product is intended for use as originally designed and should not be modified for alternative purposes. Please ensure it is installed by a qualified professional. Fitting instructions are typically not included with the product. Contacts
Product Attributes
Also known as
AC601SB05
Fitting Info
Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.
Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.
Marque
Volkswagen
Vehicle
Beetle, Karmann Ghia, Beetle Cabriolet, Type 3
Weight (kg)
0.064
Thread Diameter
12
Thread Pitch
1.5
Thread length
20
Brand
Heritage Parts Centre
Country of Origin
United Kingdom
Quality
Good Quality
Unit of sale
Each
Front or Rear
Front, Rear
Fits Vehicles
Product Vehicle Years
Beetle
1950-1979
Karmann Ghia
1960-1967
Beetle Cabrio
1950-1967
Type 3
1962-1965