Gene Berg shifter 66-79 BUS

 

PLEASE EMAIL WHICH VERSION YOU REQUIRE AFTER PURCHASING (from list below)

SO I CAN PLACE YOUR ORDER. 


Order will be place shortly and take approximately 4-6 weeks to UK.

Price includes courier cost to your address.

 

 

These have a super duty 5/8" shifter shaft that is extremely strong and are warranted for one year against breakage. Reduces original travel by about 35%, 4" longer and about 4" closer to the driver. No more reaching for the shifter. All have standard 21.50mm ball for 1960 and later buses. Originated by Gene Berg in 1978. Made in USA by Gene Berg Enterprises. SW 9#

 

 
         
 ADD-BALL 

Ball handle upgrade to shifter ordered at same time. LHD & RHD, black powdercoated. Polished ADD AN EXTRA >>>

NOTE This is a replacement for the original T handle, and NOT an extra handle. 

    Extra£10
 

ADD-POLISHED BASE

Polished base upgrade.  EXTRA >>>

    £10
 GB 6746  Pre 1960 bus shifter. Chassis number up through 501706, ball diameter 15.7mm. Polished inset T handle as standard subject to availability. Approx 22" tall. Please note that you should always check your ball diameter BEFORE ordering as we are seeing a rising number of cases where previous owners have replaced the stock shift rod with the 60-65 one. We are able to make a hybrid shifter for this, as neither the GB 6746 or 6748 will work correctly. SW #5       
 GB 6746R  As GB 6746, however, for right hand drive. Black T as standard, subject to stock levels. SW #5       
 GB 6748  60-mid 1966 bus shifter. Fits chassis number 501707 through 2x6-028-111. NOTE: 1966 is a split model year so check your VIN number. Will not fit the older vehicles with a straight shift rod and smaller ball. Our ball is standard 21.50mm. Approx 7/8" from bottom of base to bottom of ball. Total length approx 25" floor to top of handle. SW #6 Polished handle as standard. Handle color subject to change.       
 GB 6748R  As GB 6748, however, for right hand drive. 1960-mid 1966 bus shifter. Fits chassis number 501707 through 2x6-028-111. NOTE: 1966 is a split model year so check your VIN number. Will not fit the older vehicles with a straight shift rod and smaller ball. Our ball is standard 21.50mm. Approx 7/8" from bottom of base to bottom of ball. Total length approx 25" floor to top of handle. SW #6 Black handle as standard. Handle color subject to change.       
 GB 6749  This shifter is for LHD pre '60 (pre 501707 VIN) that have had the '60-'65 shift rod with 21.5mm ball socket retro-fitted. Approx 22" tall.       
 GB 6749R  This shifter is for RHD pre '60 (pre 501707 VIN) that have had the '60-'65 shift rod with 21.5mm ball socket retro-fitted. Approx 22" tall.       
 GB 6750  mid 1966-79 bus shifter. Fits chassis number 2X6-028-112 to the Vanagon. Approx 1-3/8" from bottom of base to bottom of ball. Polised inset T handle as standard. Length approx 25" from floor to top of handle. SW#6       
 GB 6750R  66-79 bus shifter. Fits chassis number 216-028-112 to the Vanagon. For right hand drive buses. We have bent this shifter the opposite way and installed our right hand drive handle. Approx 1-3/8" from base to bottom of ball. Total length approx 25" from floor to top of handle. SW #6       
 GB 6751  Conversion kit to make GB 6750 or GB 6750R shifters work in a 1960-1965 bus from chassis number 835-008 through 216-028-111. INCLUDES STEEL ADAPTER PLATE FOR YOUR SHIFT GATE AND A CUT DOWN QUICKSHIFT PLATE AND BOLTS.      £75

Gene Berg BUS 4 Speed Shifters T2

£345.00Price
  • Please double check you are ordering the correct shifter, also check your bus has the correct ball size for year as some have been changed over the years. We cannot accept any responsibility for these issues but will alwasy try to help  where we can.

Opening Hours

Mon - Fri: 9am - 5pm
​​Saturday: Closed
​Sunday: Closed

By appointment only

Mansfield, Nottinghamshire, United Kingdom

Contact Us

Aircooled Hut UK Ltd Company Number 11579950

 

Mobile: 07477 050582      Aircooled Hut UK Limited